Article Sidebar
Downloads
Main Article Content
Abstract
Abstract
A biomass stove based on natural draft gasification (NDG) has been developed in a previous study (Nelwa, et al. 2013) by using simulation based on heat transfer and equilibrium modeling. In this study, a CFD simulation was performed in order to analyze the effect of chimney height, and inlet hole diameter of the stove to the performance of the stove. The results of simulation showed that power produced by stove was between 1863.9 J/s until 2585.7 J/s, and its gasification efficiency was 67.11%. The results of simulation also showed that charcoal gasification produces combustible gases (CO, CH4, and H2) at the bottom and the center of stove, and then they were oxidized by secondary air at the top of stove. This oxidation reaction produces sufficient heat energy which can be used for cooking process.
Keywords: stove, power, combustible gas, gasification efficiency
Abstrak
Sebuah Disain tungku natural draft gasification (NDG) telah diciptakan sebelumnya (Nelwa, et al. 2013) dengan menggunakan pemodelan dan simulasi berbasis pindah panas, dan equilibrium. Penelitian ini menggunakan simulasi computational fluid dynamics (CFD) untuk menganalisis performa tungku pada bagian geometri cerobong gas bakar, dan lubang udara sekunder. Hasil simulasi dari beberapa skenario tungku yang dilakukan dapat disimpulkan bahwa dari skenario disain tungku didapatkan daya tungku antara 1863.9 J/detik sampai dengan 2585.7 J/detik, dan memiliki efisiensi gasifikasi sebesar 67.11%. Proses gasifikasi arang kayu menghasilkan gas mampu bakar CO, CH4, dan H2, dimana gas mampu bakar tersebut mengalami reaksi pembakaran dengan aliran udara sekunder yang masuk di bagian tengah saluran gas mampu bakar. Reaksi pembakaran ini, menghasilkan energi panas yang memadai untuk proses memasak.
Kata Kunci: tungku, daya, gas bakar, efisiensi gasifikasi
Diterima: 02 Mei 2014; Disetujui: 15 Agustus 2014
Article Details
Authors submitting manuscripts should understand and agree that copyright of manuscripts of the article shall be assigned/transferred to Jurnal Keteknikan Pertanian. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) where Authors and Readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.