Groundwater Level Control with a Simple Fuzzy Control System
Abstract
This paper proposes a method for controlling groundwater level in order to maintain a certain desired height by using a simple fuzzy control system. The control signal is determined by evaluating the state of water surface height deviatioh from the desired height on a 4 quadrant phase plane. The control signal is then used to determine the number of drainage or irrigation pumps, which must be operated. Simulation using actual datafrom the jield shows that the proposed method is very effective to maintain the desired height of water surface. This method is very simple, therefore it can be easily implemented using a personal computer or a microcontrol/er, or up-loaded to a P LC (Programmable Logic Controller).
Authors
IskandarM. A., SusantiY., SaptomoS. K., & SetiawanB. I. (1). Groundwater Level Control with a Simple Fuzzy Control System. Jurnal Keteknikan Pertanian, 13(1). https://doi.org/10.19028/jtep.013.1.%p
Authors submitting manuscripts should understand and agree that copyright of manuscripts of the article shall be assigned/transferred to Jurnal Keteknikan Pertanian. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) where Authors and Readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.