Main Article Content
The research aimed to design a package made of corrugated board for mangosteen packaging; test the compression strength of the packaging; analyze the effect of packaging capacity and fruit packing pattern in the container on some quality parameters after transport, and analyze the economy of the packaging used.The research was conducted in three stages, namely: the measurement of physical and mechanical properties of fruit (Stage I); the packaging design i.e. determining the packaging dimension (Stage II); and packaging design testing (Stage III). Compression and vibration testing were conducted. For the vibration testing, transport simulations were conducted using the vibration simulator of 3.50 Hz and amplitude of 4.61 cm for 3 hours. The packaging was designed with a capacity of 8 kg and 15 kg using two packing pattern, namely the fcc and Jumble. Based on the physical and mechanical properties, optimal packing pattern of 8 kg container was 8, 4, and 4 pieces of fruit for the long x, y, and z direction, respectively, with the density of 62%. Therefore, gave packaging dimension of 39.4 x 21 x 21 cm. For the 15 kg container, the optimal packing pattern was 8, 6 and 5 pieces of fruit for the x, y, and z direction, respectively, with the packing density of 65.6%. Thus, gave dimension of 39.4 x 30 x 25 cm. Based on overall test results, it can be stated that the design packaging capacity of 8 kg with dimension of 39.4 cm x 21 cm x 21 cm and the fcc packing pattern gave the optimal setting for mangosteen transportation.
Keywords: packaging design, fcc, jumble, transportation, mangosteen
Diterima: 18 September 2009; Disetujui: 25 Februari 2010
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).