Design Digital to Analog Control Equipment Using Computer

Authors

  • Jarot Prianggono
  • Radite PAS

DOI:

https://doi.org/10.19028/jtep.016.1.%25p

Abstract

This study aim to identify and to analyze the behaviour ouput signal from Digital To Analog Converter (DAC) thet combined with motor DC driver. But before the analysis, the design must be conducted. Typical motor can turn clockwise and counter clockwise. Behaviour of servo motor controller was linear, so the sistem can be named by linear motor controller. This study can we used for the research on the mechatronics field, especially on the agricultural engineering.

Downloads

Download data is not yet available.

Downloads

Issue

Vol. 16 No. 1 (2002): Buletin Keteknikan Pertanian

Section

Articles

License

Authors submitting manuscripts should understand and agree that copyright of manuscripts of the article shall be assigned/transferred to Jurnal Keteknikan Pertanian. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) where Authors and Readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

How to Cite

Prianggono, J., & PAS, R. (2011). Design Digital to Analog Control Equipment Using Computer. Jurnal Keteknikan Pertanian, 16(1). https://doi.org/10.19028/jtep.016.1.%p