Pengembangan Mesin Penanam dan Pemupuk Jagung Terintegrasi dengan Pengolahan Tanah Alur

Authors

  • Agustami Sitorus Program Studi Teknik Mesin Pertanian dan Pangan, Institut Pertanian Bogor
  • Wawan Hermawan Departemen Teknik Mesin dan Biosistem, Institut Pertanian Bogor
  • Radite Praeko Agus Setiawan Departemen Teknik Mesin dan Biosistem, Institut Pertanian Bogor

DOI:

https://doi.org/10.19028/jtep.03.2.%25p

Keywords:

intergrated machine, corn planter, fertilizer applicator, strip tillage

Abstract

The prototype of integrated corn planter and fertilizer applicator for strip tillage has been developed. The development was done by using wheel axis of hand tractor for driven rotor fertilizer applicator and metering device corn planter. Planting furrows were made into two furrows on a single pass with strip tillage. The objective of this study was to develop and to conduct performance test of the corn planting and fertilizing for strip tillage. Stationer test result showed that the fertilizer applicator and corn planter performance could be metering 20.71 g/m NPK fertilizer and 1-3 seeds of corn per planting hole respectively. Field test result showed that the fertilizer applicator and corn planter performance could be metering 15.88 g/m NPK fertilizer and 1-2 seeds of corn per planting hole respectively. Mean seed spacing was 21.5 cm which was longer than the theoretical seed spacing (20 cm). Fertilizer and seed hopper capacity were 16.53 kg and 1kg respectively. Effective fieldcapacity was 0.147 ha/h (low-1)and 0.350 ha/h (low-2) and efficiency for respective speed was 76.24% and 83.78%.

 

Downloads

Download data is not yet available.

Downloads

Published

2016-01-05

Issue

Vol. 3 No. 2 (2015): JURNAL KETEKNIKAN PERTANIAN

Section

Articles

License

Authors submitting manuscripts should understand and agree that copyright of manuscripts of the article shall be assigned/transferred to Jurnal Keteknikan Pertanian. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) where Authors and Readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

How to Cite

Sitorus, A., Hermawan, W., & Setiawan, R. P. A. (2016). Pengembangan Mesin Penanam dan Pemupuk Jagung Terintegrasi dengan Pengolahan Tanah Alur. Jurnal Keteknikan Pertanian, 3(2). https://doi.org/10.19028/jtep.03.2.%p

Most read articles by the same author(s)

1 2 3 4 5 > >>