DESAIN ALAT PENGEBOR TANAH UNTUK MEMBUAT LUBANG TANAM TANAMAN TAHUNAN
DOI:
https://doi.org/10.19028/jtep.021.4.%25pAbstract
ABSTRACT
Making hole for planting perennial crops in Indonesia, especially in the farmer's plantation is still dominated by simple equipment such as hoe, manual drill etc,. while using heavy equipment such as post-hole-digger is performed only by big estates. For this reason, it is necessary to design soil-hale-digger machine which suits the field condition in Indonesia. The design was bused on Pahl and Beitz method which optimizing the use of meterial, technology and economic condition and consist of severeral stops, namely, classification of the tasks, conceptual design, embodiment design and detail design. Structural design of the post-hole-digger consisted of several main components, namely, source of power. power delivery. power transmission system, point of drill and edge of point. Source of power used was a two-stroke gasoline engine of 2.38 kW delivered through a centrifugal clutch and transmitted by worm gear with 10 : 1ratio.
Keywords: design, soil-hale-digger, planting, perennial crops
Diterima: 8 Mei 2007; Disetujui: 22 Oktober 2007
Downloads
Downloads
Published
Issue
Section
License
Authors submitting manuscripts should understand and agree that copyright of manuscripts of the article shall be assigned/transferred to Jurnal Keteknikan Pertanian. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) where Authors and Readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
