OPTIMALlSASI PRODUKSI TEBU DENGAN PROGRAM LINEAR PADA PABRIK GULA TAKALAR SULAWESI SELATAN
DOI:
https://doi.org/10.19028/jtep.021.4.%25pAbstract
ABSTRACT
The aim of the optimization of sugar cane production at PG Takalar is allocate all resources proportionally to get the maximal production according to factory design attached witt relatively low cost. The optimizetion was conducted with linear programming. The result showed that optimal planting period for the plant cane is June, July. October, and November, while for retoon is June up to November. The varieties those give the optimal production is Camp, F.154, Others, PS.61, PS.85-1. Q.81, and ROC. 10. The optimal portion of plant category was 25% plant cane, 30% retoon I. 25% retoon II and 20% of ratoon III. By optimization, the total area of 3.213 ha potentially can produce 192.036. 13 ton/year, which is increase about 115% from the regular practice.
Keyword: Linear programming, optimization, plant cane, sugar cane
Diterima: 30 Oktober 2007: Disetujui:22 Nopember 2007
Downloads
Downloads
Published
Issue
Section
License
Authors submitting manuscripts should understand and agree that copyright of manuscripts of the article shall be assigned/transferred to Jurnal Keteknikan Pertanian. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) where Authors and Readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
