MEKANISME DAN TORSI PENGEPRASAN TUNGGUL TEBU MENGGUNAKAN PISAU BAJAK PIRING YANG DIPUTAR

Authors

  • Lisyanto Lisyanto Fakultas Teknik, Universitas Negeri Medan, Jl. Willem Iskandar Pasar V, Medan Estate, Medan Sumatera Utara
  • E Namaken Sembiring Departemen Teknik Pertanian, Fakultas Teknologi Pertanian IPB, Darmaga PO BOX 220 Bogor 16002
  • I Nengah Suastawa Departemen Teknik Pertanian, Fakultas Teknologi Pertanian IPB, Darmaga PO BOX 220 Bogor 16002
  • Radite P A Setiawan Departemen Teknik Pertanian, Fakultas Teknologi Pertanian IPB, Darmaga PO BOX 220 Bogor 16002
  • M H Bintoro Djoefrie Departemen Budidaya Pertanian, Fakultas Pertanian IPB, Bogor 16680

DOI:

https://doi.org/10.19028/jtep.021.1.%25p

Keywords:

ratoon, sugar cane stubble, torque, cutting, disk plow

Abstract

ABSTRACT

 

Cutting of sugar cane stubble is one of important activities in sugar cane agriculture system. Problems on labor and low quality of cutting have not been solved by manual cutting system. In addition, a kind of farm machinery, which work in rotating ways did not give a good result in doing the cutting of sugar cane stubble. Due to low quality of cutting and broken sugar cane stubble, it is not used any more. The problem of broken sugar cane stubble in mechanical cutting system should be solved by changing the system of cutting mechanism, prefering impact cutting to chips forming. The goal of the study is to analyze the mechanism of cutting on sugar cane stubble by using rotating disk plow and to develop a mathematical model in order to determine cutting force of sugar cane stubble. Method of analyzing on movement of node on edge is used to discribe a curve of edge movement. A mathematical model of cutting force was developed base on instant cutting area which was calculated using Simpson method, numerical integration system. Equations resulted from this study can be applied to simulate the movement of edge using input parameters, mainly: tilt angle, disk angle, angular velocity,linier velocity. Variety of PA 198 has the higher specific cutting resistance per area of cutting than the other varieties. The mathematical model developed can be used to determine the cutting force with a good result.

 

Diterima: 12 Desember 2006, Disetujui: 12 Maret 2001

 

 

Downloads

Download data is not yet available.

Downloads

Published

2015-10-25

Issue

Vol. 21 No. 1 (2007): Jurnal Keteknikan Pertanian

Section

Articles

License

Authors submitting manuscripts should understand and agree that copyright of manuscripts of the article shall be assigned/transferred to Jurnal Keteknikan Pertanian. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) where Authors and Readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

How to Cite

Lisyanto, L., Sembiring, E. N., Suastawa, I. N., Setiawan, R. P. A., & Djoefrie, M. H. B. (2015). MEKANISME DAN TORSI PENGEPRASAN TUNGGUL TEBU MENGGUNAKAN PISAU BAJAK PIRING YANG DIPUTAR. Jurnal Keteknikan Pertanian, 21(1). https://doi.org/10.19028/jtep.021.1.%p

Most read articles by the same author(s)