Efektivitas Asam Asetat dalam Ekstraksi Asam Fitat Pollard
Abstract
Phytate is commonly high in cereals grain. This compound can be extracted with acid solution. The purpose of this study is to extract phytic acid from pollard using acetic acid at the concentration of 0.1, 0.5, 1, and 5%. Pollard was fractionated using vibrator ball mill to evaluate the distribution of phytic acid in the particle of pollard. One percent of acetic acid was used to extract phytic acid from pollard at ratio of 1:1; 1:1.5; 1:2; and 1:3. The fraction having particle size of 16, 30 and 50 mesh had similar phytic acid content. The results indicated that phytic acid content of these fractions was higher than that of 100 and 400 mesh fractions. Whole pollard had higher phytic acid content than its fractions. Phytic acid in pollard can be extracted by 1% acetic acid solution. Extraction of phytic acid from pollard using 1% acetic acid solution at ratio of 1:3 produced 23.83 g/kg.Key words: extraction, phytic acid, pollard, acetic acid
Downloads
Download data is not yet available.
Published
2010-05-18
Section
Articles
Authors submitting manuscripts should understand and agree that copyright of manuscripts published are held by Media Peternakan. The statement to release the copyright to Media Peternakan is stated in Form A. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) where Authors and Readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.