Simulation of Temperature Control in Growth Room for Tropical Mushroom
Abstract
Optimum growth of tropical mushrooms depend on the ambient environment. In general, mushrooms prefer low air temperature and high air humidity. The growers use closed rooms to maintain favorable conditions. Recently, use of refrigerator is of interest to maintain the favourable conditions under hot and humid climate conditions. This study is attempting to apply control mechanism in maintaining the
ambient temperature favorable for mushroom growth. A simple heat transfer equation was used to describe changes of temperature inside the growth chamber. This equation was then coupled with a fuzzy logic control to actuate a refrigerator at a suitable length of time. Three temperature condition (16, 19 and 21 O C ) were set as set points. The results show the developed technique was capable to maintain the temperature inside the growth room even though under the influence of a highly fluctuating ambient temperature. This technique was also
responsive and reliable in facing immediate disturbances, and showed a realistic requirement of cooling energy.
ambient temperature favorable for mushroom growth. A simple heat transfer equation was used to describe changes of temperature inside the growth chamber. This equation was then coupled with a fuzzy logic control to actuate a refrigerator at a suitable length of time. Three temperature condition (16, 19 and 21 O C ) were set as set points. The results show the developed technique was capable to maintain the temperature inside the growth room even though under the influence of a highly fluctuating ambient temperature. This technique was also
responsive and reliable in facing immediate disturbances, and showed a realistic requirement of cooling energy.
Authors
SetiawanB. I., WijayaD. A., & NetwanL. O. (1). Simulation of Temperature Control in Growth Room for Tropical Mushroom. Jurnal Keteknikan Pertanian, 15(1). https://doi.org/10.19028/jtep.015.1.%p
Authors submitting manuscripts should understand and agree that copyright of manuscripts of the article shall be assigned/transferred to Jurnal Keteknikan Pertanian. This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA) where Authors and Readers can copy and redistribute the material in any medium or format, as well as remix, transform, and build upon the material for any purpose, but they must give appropriate credit (cite to the article or content), provide a link to the license, and indicate if changes were made. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.