Sifat Fisika dan Mekanika Kayu Acacia aulacocarpa dari KHDTK Wanagama
Abstract
This study aims to determinethe physical properties and mechanical properties at axial (base, middle, and top) and radial (near the pith, middle, and near the bark) positions, as well as the relationship between the specific gravity and mechanical properties of Acacia aulacocarpa wood. Three 27-year-old trees planted at KHDTK Wanagama wereused. Wood physical and mechanical propertieswere tested per British Standard 373:1957. The statistical analysis used was a two-way ANOVA and a follow-up test of Tukey HSD. The results showed that the average moisture content was 98.95%; the green and air-dry sepesific gravity were 0.58 and 0.61. Radial, tangential, and longitudinal shrinkage from green to oven-dry conditions (total shrinkage) were 2.02%, 5.09%, and 0.33%. The tangential/radial (T/R) ratio was 2.80%. The static bending strength of stress at proportion limit, MoE, and MoR were 498.13 kg/cm2, 116.16x1000 kg/cm2, and 1043.68 kg/cm2, respectively. The compressive strength parallel to the grain and perpendicular to the grain were 596.05 kg/cm2 and 227.25 kg/cm2, respectively. The results of the variance analysis showed that the radial position factor has a significant effect on green moisture content, green and air-dry specificgravity, total radial shrinkage, T/R ratio, static bending strength at stress of proportion limit, MoE, MoR, compressive strength parallel to the grain, and compressive strength perpendicular to the grain. However, the axial position factor did not show any significant differences in the physical and mechanical properties of the wood. Furthermore, air-dry specific gravity has a significant moderate to high positive correlation with all mechanical properties.
Keywords: Acacia aulacocarpa, physical properties, mechanical properties, axial position, radial position
Downloads
References
Arsad E. 2011. Sifat fisis dan kekuatan mekanisa kayu akasia mangium (Acacia mangium Willd.) dari hutan tanaman industri Kalimantan Selatan. Jurnal Riset Industri Hasil Hutan 3(1): 20–23. https://doi.org/10.24111/jrihh.v3i1.1184
Bangrak C, Wichian P, Boonsong S, Wongsikaew C. 2011. Mechanical and Physical Properties of Acacia aulacocarpa. Departemen Kehutanan Bangkok, Bangkok.
Basri E, Yuniarti K, Wahyudi I, Pari R. 2020. Teknologi Pengeringan Kayu. Bogor: IPB Press.
BSI] British Standard Institution 1957. British Standard 373: Methods of Testing Small Clear Specimens of Timber. London: British Standard House.
Chowdhury MQ, Ishiguri F, Hiraiwa T, Takashima Y, Iizuka K, Yokota S, Yoshizawa N. 2012. Radial variation of bending property in plantation grown Acacia auriculiformis in Bangladesh. Forest Science and Technology 8: 135–138. https://doi.org/10.1080/21580103.2012.704961
Chowdhury MQ, Shams MI, Alam M. 2005. Effects of age and height variation on physical properties of mangium (Acacia mangium Willd.) wood. Australian Forestry 68: 17–19. https://doi.org/10.1080/00049158.2005.10676221
Desch HE, Dinwoodie JM. 1996. Timber-Structure, Properties, Conversion and Use (7th ed.). London (GB): Macmillan Press. https://doi.org/10.1007/978-1-349-13427-4
Doan DV, Thai NV, Manh KV. 2021. Effect of age on variation in physical and mechanical properties of Acacia mangium planted in Thai Nguyen. TNU Journal of Science and Technology: 50–56. https://doi.org/10.34238/tnu-jst.3689
Evans JW, Senft JF, Green DW. 2000. Juvenile wood effect in red alder: Analysis of physical and mechanical data to delineate juvenile and mature wood zones. Solid Wood Products 50: 75–87.
Firdausy A I, Waluyohadi I, Arifi E. 2020. Desain Struktur Kayu dengan Metode LRFD. Malang (ID): UB Press.
Hai PH, Jansson G, Hannrup B, Harwood C, Thinh HH. 2006. Use of wood shrinkage characteristics in breeding of fast-growing Acacia auriculiformis A. Cunn. ex Benth in Vietnam. Annals of Forest Science. 611. https://doi.org/10.1051/forest/2009048
Hidayati, F., Sulistyo, J., Lukmandaru, G., Listyanto, T, Praptoyo, H., and Pujiarti, R. (2015). Physical and mechanical properties of 10-year-old superior and conventional teak planted in Randublatung, Central Java Indonesia. Jurnal Ilmu dan Teknologi Kayu Tropis. 13(1): 11–21. https://doi.org/10.22146/jik.40162
Hidayati F, Purnama RA, Praptoyo H, Sunarti S. 2018. Pengaruh kecepatan pertumbuhan sifat fisisa dan mekanisa kayu Acacia mangium umur 4 tahun asal Wonogiri, Jawa Tengah. Jurnal Ilmu Kehutanan 10: 98–107. https://doi.org/10.20527/jht.v8i3.9739
Hidayati F, Sunarti S, Setiaji T, Nirsatmanto A. 2019. Sifat fisisa dan mekanisa kayu jabon merah (Anthocephalus macrophyllus) yang ditanam di Wonogiri, Jawa Tengah. Jurnal Hutan Tropis. 8: 357–369
Hounlonon MC, Kouchade CA, Kounouhewa BB. 2021. Physical and mechanical properties of Acacia auriculiformis A. Cunningham Ex. Benth used as timber in Benin. Journal of Materials Science and Surface Engineering. 8: 992–1000. https://doi.org/10.52687/2348-8956/815
Istikowati W, Ishiguri F, Aiso H, Hidayati F, Tanabe J, Iizuka K, Sutiya B, Wahyudi I, Yokota S. 2014. Physical and mechanical properties of wood from three native fast-growing species in a secondary forest in South Kalimantan, Indonesia. Forest Product Journal 64: 48–54. https://doi.org/10.13073/FPJ-D-13-00069
Kim NT, Ochiishi M, Matsumura J, Oda K. 2008. Variation in wood properties of six natural acacia hybrid clones in northern Vietnam. Journal of Wood Science 54: 436–442. https://doi.org/10.1007/s10086-008-0976-2
Kollmann FFP, WA Côté Jr. 1968. Principles of Wood Science and Technology I Solid Wood. New York (US): Springer Verlag. https://doi.org/10.1007/978-3-642-87928-9
Machado JS, Louzada JL, Santos AJA, Nunes L, Anjos O, Rodrigues J, Simoes RMS, Pereira H. 2014. Variation of wood density and mechanical properties of blackwood (Acacia melanoxylon R. Br.). Materials and Design. 56: 975–980. https://doi.org/10.1016/j.matdes.2013.12.016
Makino K, Ishiguri F, Wahyudi I, Takashima Y, Iizuka K, Yokota S, Yoshizawa N. 2012. Wood properties of young Acacia mangium trees planted in Indonesia. Forest Product Journal. 62(2): 102–106. https://doi.org/10.13073/0015-7473-62.2.102
Marsoem SN, Prasetyo VE, Sulistyo J, Sudaryono, Lukmandaru G. 2015. Studi mutu kayu jati di hutan rakyat Gunungkidul IV. Sifat Mekanisa Kayu. Jurnal Ilmu Kehutanan. 9: 117–127. https://doi.org/10.22146/jik.10197
Moya F, Munoz R. 2008. Moisture content variability in kiln-dried Gmelina arborea wood: effect of radial position and anatomical features. Journal of Wood Science. 54: 318–322. https://doi.org/10.1007/s10086-008-0954-8
Nugroho WD, Marsoem SN, Yasue K, Fujiwara T. Nakajima T, Hayakawa M, Funada R. 2012. Radial variations in the anatomical characteristics and density of the wood of Acacia mangium of five different provenances in Indonesia. Journal of Wood Science 58: 185–194. https://doi.org/10.1007/s10086-011-1236-4
Panshin AJ, de Zeeuw C. 1980. Textbook of Wood Technology. Ed. Ke-4. New York (US): McGraw-Hill.
Pasaribu G. 2007. Sifat fisis dan mekanis empat jenis kayu andalan asal Sumatera Utara. Jurnal Penelitian Hasil Hutan 25: 15–27. https://doi.org/10.20886/jphh.2007.25.1.15-27
Purwanto D. 2012. Pemanfaatan kayu akasia mangium (Acacia mangium Willd) untuk mebel. Jurnal Riset Industri Hasil Hutan. 4: 1–8. https://doi.org/10.24111/jrihh.v4i1.1195
Prawirohatmodjo S. 2012. Sifat-Sifat fisika Kayu. Yogyakarta. Cakrawala Media.
Putro GS dan Marsoem SN. 2004. Variasi sifat dasar pada kedudukan aksial dan radial serta potensi pemanfaatan kayu melinjo. Buletin Agro. 16: 52–61
Seng OD. 1990. Berat Jenis dari Jenis-jenis Kayu Indonesia dan Pengertian Beratnya Kayu untuk Keperluan Praktek. Penerjemah: Suwarsono PH. Bpgor (ID): Pusat Penelitian dan Pengembangan Hasil Hutan. Departemen Kehutanan Indonesia.
Shmulsky R, Jones PD. 2019. Forest Products and Wood Science: An Introduction. Ed. Ke-7. London (GB): Wiley-Blackwell. https://doi.org/10.1002/9781119426400
Siarudin M, Marsoem SN. 2007. Karakteristik dan variasi sifat fisisa kayu Acacia mangium Willd. pada beberapa jarak tanam dan kedudukan aksial-radial. Jurnal Pemuliaan Tanaman. 1(1): 1–13. https://doi.org/10.20886/jpth.2007.1.1.1-13
Skaar C. 1988. Wood-Water Relations. Berlin (GB): Springer. https://doi.org/10.1007/978-3-642-73683-4
[SNI] Standar Nasional Indonesia. 1989. SNI 01-0608-89: Syarat Fisik dan Mekanis Kayu Untuk Mebel. Dewan Standardisasi Nasional. Jakarta.
[SNI] Standar Nasional Indonesia. 1994. SNI 03-3527-94: Kayu untuk Bangunan Struktural. Jakarta: Dewan Standardisasi Nasional.
[SNI] Standar Nasional Indonesia. 2017. SNI 0608-2017: Kayu untuk Furnitur (Persyaratan Karakteristik). Jakarta: Badan Standardisasi Nasional Indonesia
Spear M, Walker J. 2006. Dimensional Instability in Timber-Principles and Practice. Dalam Primary Wood Processing (hlm. 95–120). Netherlands (NL): Springer. https://doi.org/10.1007/1-4020-4393-7_4
Suprapti S, Krisdianto. 2006. Ketahanan empat jenis kayu hutan tanaman terhadap beberapa jamur perusak kayu. Jurnal Penelitian Hasil Hutan 24(4): 267–274. https://doi.org/10.20886/jphh.2006.24.4.267-274
Turnbull J, Crompton H, Pinyopusarerk K. 1998. Recent developments in acacia planting. Hanoi: ACIAR Proceedings.
Wheeler EA, Baas P, Gasson PE. 2008. Ciri Mikroskopik Untuk Identifikasi Kayu Daun Lebar. Alih bahasa Sulistyobudi, A., Mandang, Y.I, Damayanti, R. dan Rulliaty, S. dari judul asli IAWA List of Microscopic Features for Hardwood Identification. Bogor (ID): Pusat Penelitian dan Pengembangan Hasil Hutan.
Zobel BJ, Sprauge JR. 1998. Juvenile Wood in Forest Trees. Berlin (GB): Springer. https://doi.org/10.1007/978-3-642-72126-7
This journal is published under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License. Authors who publish with this journal agree to the following terms: Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. NonCommercial — You may not use the material for commercial purposes.
View JIPI StatsCounter
