Konsentrasi Sorbitol dan Volume Larutan Terbaik pada Cetakan Film Edibel dari Pati Sagu
Abstract
This study aims to determine the effect of sorbitol concentration and solution volume on the mold on the physical properties of the edible film from sago strach. This research was conducted at the Laboratory of Agricultural Sciences STIP Mujahidin Tolitoli, Tuweley Village, Baolan District, Tolitoli Regency, Central Sulawesi Tengah from October to December 2020. This study used a factorial completely randomized design (FCRD). The first factor (a) is the concentration of sorbitol, namely a1 (5 mL/100 mL solution), a2 (6 mL/100 mL solution), and a3 (7 mL/100 mL solution) while the second factor (m) is the volume of the solution in the mold, namely m1 (5 mL), m2 (10 mL), and m3 (15 mL). The data were analyzed using variance followed by the 1% Duncant Multiple Range Test (DMRT). The results showed that the addition of sorbitol concentration had an effect on the color, thickness, and solubility in water, while the addition of solution volume in the mold affected the color, thickness and water vapor transmission. The best treatment due to the addition of sorbitol concentration to edible film is 5% sorbitol concentration treatment, namely the color has a high brightness level, 0.19 mm thickness, and 41.5% solubility. While the best treatment due to the addition of the volume of the solution on the edible film is the treatment of the 5 ml solution volume, namely the color has a high level of brightness, a thickness of 0.14 mm and a water vapor transmission of 1.11g/m2.hour.
Keywords: edible film, sago starch, sorbitol
Downloads
References
Afriyah Y, Putri WDR, Wijayanti SD. 2015. Penambahan Aloe vera L. dengan Tepung Sukun (Artocarpus communis) dan Ganyong (Canna adulis Ker.) Terhadap Karakteristik Edible Film. Jurnal Pangan dan Agroindustri. 4: 1313‒1324.
Hidayati S. 2015. Aplikasi Sorbitol Pada Produksi Biodegradable Fil Dari Nata De Cassaa. Jurnal Reactor. 15(3): 196‒204. https://doi.org/10.14710/reaktor.15.3.195-203
Huri D, Nisa FC. 2014. Pengaruh Konsentrasi Gliserol dan Ekstrak Kulit Apel Terhadap Karakteristik Fisik dan Kimia Edible Film. Jurnal Pangan dan Agroindustri. 2(4): 29‒40.
Huseini F. 2016. Pengaruh Kekuatan Gel dan Penambahan Nipagin Terhadap Sifat Fisik, Mekanis dan Aktivitas antimikroba Edible Film. [Skripsi]. Bogor (ID): Institut Pertanian Bogor.
Marcuzzo E, Sensidoni A, Debeaufort F, Voillet A. 2010. Encapsulation of Aroma Compounds in Bioporic Emulsion Based Edible Films to Control Flavour Release. Carbohydrate Polymer. 80: 984‒988. https://doi.org/10.1016/j.carbpol.2010.01.016
Marseno DW. 2003. Pengaruh Sorbitol Terhadap Sifat Mekanik dan Transmisi Uap Air Film Dari Pati Jagung. Prosiding Seminar Nasional Industri Pangan. Yokyakarta (ID).
Paradita V. 2013. Formulasi Produk Edible Film Strip Herbal Berbahan Dasar Tapioka Dengan Ekstrak Jahe (Zingiber officianale Roscoe). [Skripsi]. Bogor (ID): Institut Pertanian Bogor.
Septiana, E. 2009. Formulasi dan Aplikasi Edible Coating Berbasis Pati Sagu Dengan Penambahan Minyak Sereh pada Paprika (Capsicum annum var Athena). Skripsi. Institut Pertanian Bogor. Bogor.
Rusli A, Metusalach, Salengke, Tahir MM. 2017. Karakterisasi edible film karagenan denganpemplastisgliserol. JPHPI. 20(2): 219‒229. https://doi.org/10.17844/jphpi.v20i2.17499
Rauf RF, Fadilah R, Rivai AA. 2021. Program Edukasi Penanganan Pascapanen untuk Meningkatkan Nilai Jual Jahe Merah (Zingiber officinale var. Rubrum) di Desa Pao Kecamatan Tombolopao Kabupaten Gowa. Jurnal Dedikasi. 23(1): 22‒26.
Warkoyo, Rahardjo B, Marseno DW, Karyadi JNW. 2014. Sifat Fisik, Mekanik dan Barrier Edible Film Berbasis Pati Umbi Kimpul (Xanthosoma sagittifolium) Yang Diinkorporasi Dengan Kalium sorbet. Jurnal Agritech. 23(1).
Yan, Jiawei, Luo, Zisheng, Zhaojun B, Hongyan L, Dong L, Dongmei Y, Morteza SA, LiLi. 2019. The Effect of the layer-by-layer (LBL) edible coatingon strawberry qualit yandmetabolites duringstorage. Posth arvest Biologyand Technology.147: 29‒38. https://doi.org/10.1016/j.postharvbio.2018.09.002
This journal is published under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License. Authors who publish with this journal agree to the following terms: Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. NonCommercial — You may not use the material for commercial purposes.