Distribusi dan Luas Stomata pada Tanaman Hias Monokotil
Abstract
Ornamental plants give beauty to the surrounding environment. Fresh air is created around the plant. It is concerned with transpiration which relates to the distribution and extent of stomata. The study measured the distribution and extent of stomata in monocot plants used as houseplants. The experimental design used a complete randomized design (RAL) factorial with five replications. The main factors were six types of monocot plants and three parts of plants (top, middle, and bottom). The interaction between plant types and parts was a combination factor. The distribution and area of the stomata were measured using replica methods and micrometers. The data was analyzed using the factorial RAL model statistical analysis system and followed up with the smallest real different test for significant treatment. The distribution of stomata was correlated with the stomata area to observe the relationship between the two. Plant types, plant parts, and combinations of both have a noticeable effect on the stomata distribution and area. The Paris lilies (Chlorophytum comosum (Thumb) Jacq.) have the highest stomata distribution (20.53%) compared to others, with a stomata area of 291.89 μm2. Meanwhile, the top part of the plant has the highest distribution and differs from the middle and bottom. The highest stomata distribution is at the top of the plant (15.02%) and lowest at the bottom (11.96%), while the smallest stomata area is at the top of the plant (687.62 μm2) and the widest is at the bottom (813.88 μm2). The stomata distribution correlates inversely with the stomata area of both plant types, plant parts, and a combination of both.
Keywords: ornamental plants, monocotyledon, stomatal area, stomatal distribution
Downloads
References
Dewi NPSR, Eniek K, Pande KS. 2015. Hubungan Kekerabatan 12 Kultivar Brokoli (Brassica oleracea L.) Berdasarkan Karakter Anatomi Stomata. Jurnal Simbiosis III. 1: 291-300.
Eberly D. 2016.The Area of Intersecting Ellipses.
Fahn A. 1991. Anatomi Tumbuhan. Yogyakarta (ID): Gajah Mada University Press.
Hakim AR, Dorly, Sri R. 2013. Keragaman dan Analisis Kekerabatan Hoya sp. Bertiper Daun Non Sukulen Berdasarkan Karakter Anatomi Daun. Buletin Kebun Raya. 16(1): 6-7.
Haryanti S. 2010. Jumlah dan Distribusi Stomata Pada Daun Beberapa Spesies Tanaman Dikotil dan Monokotil. Buletin Anatomi dan Fisiologi. XVIII (2): 21-28.
Hidayat EB. 1995. Anatomi Tumbuhan Berbiji. Bandung (ID): Institut Teknologi Bandung.
Juariah L. 2014. Studi Karakter Stomata Beberapa Jenis Tanaman Revegetasi Di Lahan Pasca Penambangan Timah Di Bangka. Widyariset. 17(2): 213-218.
Mulyani S. 2006. Anatomi Tumbuhan. Yogyakarta (ID): Kanisus.
Nurten AVCIa, Ahmet AYGÜN. 2014. Determination of Stomatal Density and Distribution on Leaves of Turkish Hazelnut (Corylus avellana L.) Cultivars. 20: 454459.
Price A, Courtois B. 1991. Mapping QTLs Associated with Drought Resistance in Rice; Progress Problem and Prospect. Los Banos: International Rice Research Institute.
Putriani A, Hari P, Reina SW. 2019. Karakteristik Stomata Pada Pohon di Ruang Terbuka Hijau Universitas Tanjungpura Kota Pontianak. Jurnal Hutan Lestari. 7(2): 746-751.
Rohman F, Hamida R. 2017. Keragaan Karakter Morfologi, Stomata, dan Klorofil Enam Varietas Tembakau Lokal Tulungagung. Buletin Tanaman Tembakau, Serat dan Minyak Industri. 9(1): 15-23.
Satolom AW, Kandowangko NY, Katili AS. 2014. Analisis Kadar Klorofil, Indeks Stomata dan Luas Daun Tumbuhan Mahoni (Swietenia macrophylla King.) pada Beberapa Jalan di Gorontalo. Fakultas MIPA Universitas Negeri Gorontalo: Gorontalo (ID).
Sugiyono. 2015. Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung (ID): Alfabeta.
This journal is published under the terms of the Creative Commons Attribution-NonCommercial 4.0 International License. Authors who publish with this journal agree to the following terms: Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. NonCommercial — You may not use the material for commercial purposes.